Bucket elevator is the device which is used to vertically lift the limestone, coal, gypsum, clinker, dry clay that have been crushed and other granular material, raw material, cement, braize and other powdered materials. It has many advantages, such as: machine aesthetic appearance, small volume, low power consumption, large conveying capacity.
Generally speaking, how to improve the bucket elevator, Henan Hongxing Mining Machinery Co., Ltd. can proceed from the following aspects:
1. Set vents in the head and the bottom of the hoist, and coupled with suction tube in order to not form a negative pressure, and that the dust will not spill in the feed and discharge process.In this case, it is possible to avoid waste of material and the pollution of the environment.
2. You can set the antiskid drive wheel, or abrasion resistance of rubber cloth, thus it can increase the coefficient of friction between the driving wheel and the belt to prevent belt slippage and improve the efficiency of the
bucket hoist.
3. Fit anti-reverse device in the nose section of
bucket hoist conveyor so that the machine can be avoided reversal phenomenon, thus avoid that the belt is damaged, or even ruptured. Generally, it is better to use ratchet mechanism as the anti-reverse device.
4. Use good quality belts for the protection of bolts and do the work of rust and dust prevention, thus not only can significantly reduce the probability of failure, but also easily adjust the belt.
5. Install the speed monitoring device. When the speed of bucket elevator exceeds a predetermined range, it can alarm and also switch off the air in order to protect the device.
6. Set the block plate to avoid backflow, and the distance between the hopper should be about 15mm,which is appropriate.
Welcome to visit Hongxing Machinery:
sales@hxjq.com.
elevating conveyor belt:
http://www.hxjq-ballmill.com/pro/bucket_hoist_conveyor.html